Merge 'falcon2.stl';
Surface Loop(2) = {1};
//Volume (3) = {2};
//Physical Surface(2) = {-1};
Point(201) = {-30.0,30.0,15.0,0.1};
Point(202) = {-30.0,30.0,-15.0,0.1};
Point(203) = {0.0,30.0,15.0,0.1};
Point(204) = {0.0,30.0,-15.0,0.1};


Line(203) = {202,204};
Line(204) = {204,203};
Line(205) = {203,201};
Line(206) = {201,202};
Line Loop(207) = {203,204,205,206};
Plane Surface(208) = {207};
Extrude {0,-50,0} {
  Surface{208};
  Recombine;
  //Layers { { 50 }, { 1000 }, {1} };
}

//Surface Loop(231) = {-1};
Surface Loop(232) = {-217,208,-221,-225,-229,-230};
Volume(233) = {232,2};

Delete { Volume{1}; }

Physical Surface(234) = {221,217,229,225};
Physical Surface(235) = {208};
Physical Surface(236) = {230};
Physical Surface(237) = {2};
Physical Volume(238) = {233};
Physical Volume(239) = {1000};
//Recombine Surface {221,225,208,229,230,217};
//Transfinite Volume{233} = {203,204,202,201,214,205,206,210};
